Welcome, Guest. Please login or register.
Did you miss your activation email?
February 23, 2018, 01:35:14 PM

Login with username, password and session length

Visit the Official Endian Reference Manual  HERE
13596 Posts in 4171 Topics by 5432 Members
Latest Member: ConnieReit
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  Installation Support
| | |-+  EFW 3.2.2 not booting after install
0 Members and 0 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: EFW 3.2.2 not booting after install  (Read 1765 times)
jesus.beltran
Jr. Member
*
Offline Offline

Posts: 2


« on: April 05, 2017, 02:44:10 AM »

Hi,

I'm setting up a new equipment with EFW 3.2.2. Installation goes fine, but as soon as it is completed and the system reboots from HDD, it goes to a black screen with blinking cursor. Nothing else happens. I already tried EFW 3.2.2 and 3.2.1 with the same result. Even swapped hard drives.

System Specs are:

  Gigabyte GA-H81M-H motherboard
  Pentium G3260 LGA1150 processor
  4GB RAM
  Toshiba SATA-3 500Gb Hard Drive

I've disabled the serial port console option at the installation, so I guess this isn't the issue.

Anyone has had the same problem before? Any hints?
Logged
jesus.beltran
Jr. Member
*
Offline Offline

Posts: 2


« Reply #1 on: April 05, 2017, 04:04:57 AM »

Ok figured this one out. Had to turn off AHCI for SATA on the board's BIOS. That did the trick.
Logged
marziano
Jr. Member
*
Offline Offline

Posts: 1


« Reply #2 on: November 03, 2017, 09:16:30 PM »

Ok figured this one out. Had to turn off AHCI for SATA on the board's BIOS. That did the trick.

Ok, this worked for me too. But what if you want to use a solid state drive? You need AHCI for TRIM to work.
Logged
mmiat
Sr. Member
****
Offline Offline

Gender: Male
Posts: 233


WWW
« Reply #3 on: February 08, 2018, 03:54:25 AM »

me too with 3.2.4
gigabyte GA-C1037UN-EU
cpu Celeron 1037U
2gb ram
ssd kingston 30GB

endian 2.5.2 was running, i tried to update it without success
change AHCI to IDE didnt fix
Logged

---------------------
IT Consultant
www.fsw.it
Hardware & Software
mmiat
Sr. Member
****
Offline Offline

Gender: Male
Posts: 233


WWW
« Reply #4 on: February 08, 2018, 09:39:34 PM »

i can install endian 2.5.2, but 3.2.2 or 3.2.4 cant Sad
Logged

---------------------
IT Consultant
www.fsw.it
Hardware & Software
mmiat
Sr. Member
****
Offline Offline

Gender: Male
Posts: 233


WWW
« Reply #5 on: February 17, 2018, 09:11:54 PM »

it seems ok after disabled uefi
it was "legacy and uefi", it was not good, it's needed "legacy only"
Logged

---------------------
IT Consultant
www.fsw.it
Hardware & Software
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.084 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com