EFW Support

Support => General Support => Topic started by: keysman75 on Friday 14 July 2017, 06:45:54 pm



Title: More IP associated to my office
Post by: keysman75 on Friday 14 July 2017, 06:45:54 pm
Hi guys, I have an issue about our office's IPs. Let me explain what I have and what I have configured. Actually I have EF Community 3.0.5beta1 with a Main Uplink connection working and configured as follow (Network->Interfaces):
Description: Main uplink
Network mode: Routed
Uplink type: PPPoE
Device: 2) eth1 Broadcom [Link OK]
Authentication: PAP or CHAP
Our main static ip is 194.183.122.x.

We even have 8 more IP's associated (one of these is 194.183.66.x): doing a traceroute I can confirm the right routing:

agabell@agabell-laptop:~$ sudo traceroute -I 194.183.66.x
traceroute to 194.183.66.x (194.183.66.x), 30 hops max, 60 byte packets
 1  192.168.154.20 (192.168.154.20)  0.929 ms  0.984 ms  0.987 ms
 2  host-194-183-83-x-static.mitalia.de (194.183.83.x)  6.294 ms  9.205 ms  9.219 ms
 3  * * *
 4  * * *

Now my question is: how configure EF to enable IP 194.183.66.x and route all the traffic to GREEN ?

Thanks



Title: Re: More IP associated to my office
Post by: Dark-Vex on Monday 17 July 2017, 05:18:29 pm
Hi! You need to create a policy routing rule, from the webinterface go under "Network > Routing > Policy Routing > Create a policy routing rule" and select source type "Zone/interface" (and choose the GREEN) and destination type choose "<any>", then choose under Route via "Uplink" and choose the uplink 194.183.122.x